Check-In Instructions - Hyve #3049
Please Read this Important Document Before Checking In
There will be 2 codes in your check-in instructions email.
The first code is the Gate Code.
The second code is the Apartment Door Code.
Please find these codes in your check-in instructions email before attempting to check-in.
This guide shows the entire check-in procedure
Step 1: Find Parking Lot Entrance
The entrance to the parking lot is located at these precise coordinates:
Step 2: Open the parking lot gate using the Gate Code
- Turn your blinkers on, put your car in park, get out of the car and walk to the other side of the callbox.
- Enter the gate code.
- If you've entered the gate code correctly you will hear a tone and the gate will open.
- If this does not happen please try to enter the code again (make sure to use the "#" sign in the code)
Step 3: Locate Building B
Your Apartment is in Building B, this is the building opposite your entrance to the parking lot.
Please see the image below for reference:
Step 4: Find the Callbox on Building B
Use the map below to find the callbox relative to the parking lot entrance:
The building entrance and callbox looks like this:
Step 5: Enter the Gate Code into the callbox
The gate code will be "#" followed by four digits.
Step 6: Go to Floor 3
The elevator is directly to the left after entering building B.
Take the elevator up to 3rd floor.
Step 7: Find Apartment 3049
After exiting the elevator you'll see this sign:
After exiting the elevator turn left and walk down the hallway all to the end.