Check-In Instructions - The Slate #132
Please Read this Important Document Before Checking In
There will be 2 codes in your check-in instructions email.
The first code is the Gate Code.
The second code is the Apartment Door Code.
Please find these codes in your check-in instructions email before attempting to check-in.
This procedure shows the entire check-in procedure:
Step 1: Find Parking Lot Entrance
The entrance to the parking lot is located at these precise coordinates:
Step 2: Open the Gate Using the Gate Code
Enter through the gate on the right.
- Enter the gate code. The code is "#" followed by 4 digits.
- If you've entered the gate code correctly you will hear a tone and the gate will open.
- If this does not happen please try to enter the code again (make sure to use the "#" sign in the code).
Step 3: Locate Building 1
Step 4: Find the Callbox on Building
Step 5: Enter the Gate Code into the callbox
Enter the same gate code you used previously to enter the parking lot.
The gate code will be "#" followed by four digits.
Step 6: Follow the Map to 132
Make a left after entering the building. Walk to the end of the hallway and turn right.
At the end of the next hallway turn left. The apartment will be on your right.
Step 7: Find Apartment 132
Look for the placard on the right side on the door.
Step 8: Open Door Using 4-digit Apartment Door Code
Use the same 4-digit code followed by the check mark ✓ to lock the door when exiting.