Check-In Instructions for The Slate Unit 422

Updated 2 years ago by Thomas Berg

Please Read this Important Document Before Checking In

There will be 2 codes in your check-in instructions email.

The first code is the Gate Code.

The second code is the Apartment Door Code.

Please find these codes in your check-in instructions email before attempting to check-in.

This video shows the entire check-in procedure

Slate-422-Check-in-V1-for-gif.gif

Step 1: Find Parking Lot Entrance

The entrance to the parking lot is located at these precise coordinates:

Click here to open in google maps.

Step 2: Open the parking lot gate using the Gate Code

  1. Enter the gate code. The code is "#" followed by 4 digits.
  2. If you've entered the gate code correctly you will hear a tone and the gate will open.
  3. If this does not happen please try to enter the code again (make sure to use the "#" sign in the code).

Step 3: Locate Building 2

Step 4: Find the Callbox on Building

Step 5: Enter the Gate Code into the callbox

Enter the same gate code you used previously to enter the parking lot.

The gate code will be "#" followed by four digits.

Step 6: Go to Floor 4

Take the elevator to the 4th floor.

Step 7: Turn right through the Breezeway (outside)

After exiting the elevator turn right and go through the breezway.

The breezeway is outdoors.

Turn right at the end of the hall after exiting the breezeway.

Step 8: Find Apartment 422

Step 9: Open door to apartment using 4-digit Apartment Door Code

The 4-Digit Apartment Door Code is usually the last 4 digits of your phone number
Please make sure to pull the door shut all the way.
Use the same 4-digit code followed by the check mark ✓ to lock the door when exiting.

Step 10: Enjoy your stay!


How did we do?


Powered by HelpDocs (opens in a new tab)