Check-In Instructions - Slate #132
Please Read this Important Document Before Checking In
There will be 2 codes in your check-in instructions email.
The first code is the Gate Code.
The second code is the Apartment Door Code.
Please find these codes in your check-in instructions email before attempting to check-in.
This procedure shows the entire check-in procedure:
Step 1: Find Parking Lot Entrance
The entrance to the parking lot is located at these precise coordinates:
Step 2: Open the Gate Using the Gate Code
Enter through the gate on the right.
- Enter the gate code. The code is "#" followed by 4 digits.
- If you've entered the gate code correctly you will hear a tone and the gate will open.
- If this does not happen please try to enter the code again (make sure to use the "#" sign in the code).Step 3: Locate Building 2
Step 4: Find the Callbox on Building
Step 5: Enter the Gate Code into the callboxEnter the same gate code you used previously to enter the parking lot.
The gate code will be "#" followed by four digits.
Step 6: Go to Floor 2Take the elevator to the 2nd floor.
- Exit to the right and cross the bridge into the other building
- Enter and take the stairs down to the first floor
- After exiting the stairs walk toward the right and 132 is on your right hand side
Step 7: Find Apartment 132
Look for the placard on the right side on the door.
Step 8: Open Door Using 4-digit Apartment Door Code
Use the same 4-digit code followed by the check mark ✓ to lock the door when exiting.