Check-In Instructions - The Slate #265
Please Read this Important Document Before Checking In
There will be 2 codes in your check-in instructions email.
The first code is the Gate Code.
The second code is the Apartment Door Code.
Please find these codes in your check-in instructions email before attempting to check-in.
This guide shows the entire check-in procedure
Step 1: Find Parking Lot Entrance
The entrance to the parking lot is located at these precise coordinates:
Step 2: Open the parking lot gate using the Gate Code
- Enter the gate code. The code is "#" followed by 4 digits.
- If you've entered the gate code correctly you will hear a tone and the gate will open.
- If this does not happen please try to enter the code again (make sure to use the "#" sign in the code).
Step 3: Locate Building 3
Step 4: Find the Callbox on Building 3
Step 5: Enter the Gate Code into the callbox
Enter the same gate code you used previously to enter the parking lot.
The gate code will be "#" followed by four digits.
Step 6: Go to Floor 2
Take the elevator to the 2nd floor.
You will see this sign on the wall after exiting the elevator.
Step 7: Find Apartment 265
The apartment is directly to the left after exiting the elevator.
Make 2 lefts and walk down the hall, the apartment will be on your left.
Step 8: Open door to apartment using 4-digit Apartment Door Code
Use the same 4-digit code followed by the check mark ✓ to lock the door when exiting.