Check-In Instructions for The Slate Unit 364

Updated 2 years ago by Thomas Berg

Please Read this Important Document Before Checking In

There will be 2 codes in your check-in instructions email.

The first code is the Gate Code.

The second code is the Apartment Door Code.

Please find these codes in your check-in instructions email before attempting to check-in.

This video shows the entire check-in procedure

Slate-364-Checkin-V1.gif

Step 1: Find the parking lot entrance

The entrance to the parking lot is located at these precise coordinates:

Click here to open in google maps.

Step 2: Open the parking lot gate using the Gate Code

  1. Enter the gate code. The code is "#" followed by 4 digits.
  2. If you've entered the gate code correctly you will hear a tone and the gate will open.
  3. If this does not happen please try to enter the code again (make sure to use the "#" sign in the code).

Step 3: Locate building 3

Step 4: Find the callbox on the building

Step 5: Enter the Gate Code into the callbox

Enter the same gate code you used previously to enter the parking lot.

The gate code will be "#" followed by four digits.

Step 6: Go to Floor 3

Take the elevator to the 3rd floor.

You will see this sign on the wall after exiting the elevator.

Step 7: Find Apartment 364

Make 2 lefts and walk down the hall, the apartment will be on the left-hand side of the hallway.

Step 8: Open the apartment door using the 4-digit Apartment Door Code

The 4-Digit Apartment Door Code is usually the last 4 digits of your phone number
Please make sure to pull the door shut all the way.
Use the same 4-digit code followed by the check mark ✓ to lock the door when exiting.

Step 9: Enjoy your stay!


How did we do?


Powered by HelpDocs (opens in a new tab)