Check-In Instructions - The Slate #411

Updated 2 years ago by Nishant Kumar

Please Read this Important Document Before Checking In

There will be 2 codes in your check-in instructions email.

The first code is the Gate Code.

The second code is the Apartment Door Code.

Please find these codes in your check-in instructions email before attempting to check-in.

This procedure shows the entire check-in procedure:

Step 1: Find Parking Lot Entrance

The entrance to the parking lot is located at these precise coordinates:

Click here to open in google maps.

Step 2: Open the Gate Using the Gate Code

Enter through the gate on the right.

  1. Enter the gate code. The code is "#" followed by 4 digits.
  2. If you've entered the gate code correctly you will hear a tone and the gate will open.
  3. If this does not happen please try to enter the code again (make sure to use the "#" sign in the code).

Step 3: Locate Building 1

Step 4: Find the Callbox on Building

Step 5: Enter the Gate Code into the callbox

Enter the same gate code you used previously to enter the parking lot.

The gate code will be "#" followed by four digits.

Step 6: Follow the Map to the Elevator

Take the elevator to the 4th floor.

Step 7: Find Apartment 411

Look for the placard on the left side on the door.

Step 8: Open Door Using 4-digit Apartment Door Code

The 4-Digit Apartment Door Code is usually the last 4 digits of your phone number
Please make sure to pull the door shut all the way.
Use the same 4-digit code followed by the check mark ✓ to lock the door when exiting.

Step 9: Enjoy Your Stay!


How did we do?


Powered by HelpDocs (opens in a new tab)